Neurotrac Digital Dual Channel TENS

  • Price:
    £105.24
  • Availability:
    In Stock
  • Code:
    NT3
  • Brand:
    Verity

NT3 Digital Dual Channel TENS

The NT3 Dual Channel TENS manufactured to highest quality. Designed for long term use every day , featuring multiple programs. This device can be locked to secure device from patient intervention

Features:
• Programmable and preset programs
• More accurate than conventional TENS
• Large display
• Easier to use
• Dual Channel
• Lockable
• Sturdy belt clip
• Complete with case, manual, patient leads, battery & 1 pack of 4 SAE electrodes

Cannot be supplied outside UK or Ireland

Technical info

  • Dual channel: individually isolated circuits.
  • Amplitude: 0 – 80 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
  • Selectable pulse width: 50mS -300mS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 Hz – 200 Hz [2% accuracy].
  • Mode: Continuous, Burst or Modulated.
  • Burst mode: Bursts of 9 pulses [200 mS] at 150 Hz, repeating twice every second.
  • Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. Width starting at 200 mS and decreasing exponentially to 100 mS in three seconds and then returning back to 200 mS in the next three seconds. Rate starting at 100 Hz, decreasing exponentially to 65 Hz and then returning to 100 Hz.
  • Time duration of the treatment selectable: 1 minute to 12 hours.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.

VAT Exemption Price?

If you're seeing a 'VAT Exemption Price', then this product qualifies as VAT exempt.

Just enter the details of your disability or long-term illness/medical condition (or those of the person you are buying for) on the basket page and we'll apply the discount.

Close